Tillbage till toppen

Underkategorier

  • PET-G 1,75mm Devil Design

    PETG Temperature Celsius Min Max Extruder 210 235 Build Platform 45 60 Polyethylene terephthalate, also known as “Polyester”  1Kg.

  • PLA 1,75 mm Devil Design

    Rigtig Lækker PLA.  Farvefast. INGEN KANDiSERING. Som På Billigere Mærker. Devil Design Pla 1,75 mm - Material: TPU (rubber) - Material: HIPS (support material)

  • PLA 2,85 mm Devil Design

    Nyt Filament fra Devil Design nu i 2,85 mm

  • ABS 1,75mm Devil Design

    ABS 1.75mm Quality ABS 1.75mm Filament for 3D Printing from European Devil Design Devil Design Filament Diameter: 1,75mm Dimensional tolerance: +/- 0,05mm Roundness: +/- 0,02mm Manufacturer: Devil Design, Europe Weight: 1kg net Spool diameter: 200mm Spool width: ~ 70mm Diameter mounting hole: 52mm Recommendations: Hot end: 235-255 o C Heating bed*: 90-100 o C Filament coiled on a bobbin vacuum packed together with a desiccant. Filament compared to standard ABS material it is characterized by a reduced shrinkage processing, improved bonding layers, and six times greater flow ratio. ABS, or Acrylonitrile butadiene styrene is a petroleum derived thermoplastic. It is amorphous, so it has no true melting point, instead ABS becomes more and more soft as temperature increases. It is resistant to many acids and alcohol, but soluble in Acetone. It is light-weight, melts at higher temperatures, and stronger than PLA. It is more difficult to print than PLA, however, and often doesn’t have as fine surface details. Industrially, it is used to make helmets, sporting canoes, and legos! ABS is not food safe and dangerous to the environment. Print only in ventilated areas and dispose responsibly.

  • ABS 2,85 mm Devil Design
  • TPU 1,75 mm Devil Design
  • Special Filamenter 1,75 & 2,85mm

    XT-COPOLYESTER colorFabb_XT filament is produced from Amphora™ 3D Polymer by Eastman Chemical Company. In 2013 Eastman and Helian Polymers entered a joint development program in order to develop a new unique 3D Printing material for Desktop 3D Printing. Many formulations of specialty polyesters have been tested for functionality, printability and safe printing. All these efforts have lead to a unique formulation for 3D Printing that features excellent properties : High strength and very high toughness, Odor Neutral processing, High Tg / improved temp. resistance, Styrene free formulation, FDA food contact compliance, BPA (Bisphenol A ) free formulation. Amphora 3D™ Polymer will allow the user to produce 3D printed functional products in a safe way. We are proud that colorFabb_XT is the first filament in the market to be produced with Amphora™ 3D Polymer, and now is available in a variety of colors. Start printing your own functional and engineering parts, lets us show you how : http://learn.colorfabb.com/print-_xt/

  • INNOFIL 1,75 mm PLA

    Innofil 1,75 mm PLA Best quality Innofil3D uses the best quality raw materials and ingredients for the production of 3D printing monofilaments. Innofil3D monofil gives outstanding printing results in all commercially available leading brands 3D printers. It runs smoothly through your printer because the diameter is carefully monitored during our production process. We guarantee attractive and radiant colours because colour pigments are carefully selected. Consecutive deliveries of monofil will have the same color because the production process is constantly monitored. All our products are 100% traceable.

  • Doodler Filament
  • INNOFIL 2,85mm ABS

    Innofil ABS 2,85mm Best quality Innofil3D uses the best quality raw materials and ingredients for the production of 3D printing monofilaments. Innofil3D monofil gives outstanding printing results in all commercially available leading brands 3D printers. It runs smoothly through your printer because the diameter is carefully monitored during our production process. We guarantee attractive and radiant colours because colour pigments are carefully selected. Consecutive deliveries of monofil will have the same color because the production process is constantly monitored. All our products are 100% traceable.

  • INNOFIL 2,85mm PLA

    INNOFIL 2,85mm PLA Best quality Innofil3D uses the best quality raw materials and ingredients for the production of 3D printing monofilaments. Innofil3D monofil gives outstanding printing results in all commercially available leading brands 3D printers. It runs smoothly through your printer because the diameter is carefully monitored during our production process. We guarantee attractive and radiant colours because colour pigments are carefully selected. Consecutive deliveries of monofil will have the same color because the production process is constantly monitored. All our products are 100% traceable.

  • Fillamentum - Top grade

    Filamentum - Top grade 3D printer Filament! Filamentum is a new brand in the 3D printer branche en produces and sells top-grade 3D printer filament for a good price. Our goal is to deliver the best quality Filament on the market. In the coming period our assortiment will be added containing the finest top-grade filaments of ABS and PLA in 1.75mm and 2.85mm. We don't sell any doubtfull low-quality import brands or products, but only filament coming from a selection of the best factories in Europa.

Viser 1 - 8 af 8
Viser 1 - 8 af 8

3D Printer Filament

GRATIS FRAGT STARTER VED KØB FOR 1000,-

- Der er mange materialer, der bliver udforsket til 3D printing, men du vil hurtigt opdage at de to dominerende plast er ABS og PLA. Begge er kendt som termoplast, det er de bliver blød og bøjelig, når det opvarmes og vende tilbage til en fast , når den afkøles . Denne proces kan gent...

3D Printer Filament

GRATIS FRAGT STARTER VED KØB FOR 1000,-

- Der er mange materialer, der bliver udforsket til 3D printing, men du vil hurtigt opdage at de to dominerende plast er ABS og PLA. Begge er kendt som termoplast, det er de bliver blød og bøjelig, når det opvarmes og vende tilbage til en fast , når den afkøles . Denne proces kan gentages igen og igen. Deres evne til at smelte og blive behandlet igen, er hvad der gør dem så udbredt i samfundet, og er grunden til de fleste af de plastmaterialer , du interagerer med på daglig basis er termoplast. Mens der er mange termoplast , er meget få af dem der aktuelt bruges til 3D Printing . For et materiale til at bevise rentabelt for 3D Printing , det har at passere tre forskellige tests , indledende ekstrudering i Plastic Filament , andet ekstrudering og spore - binding under 3D Printing processen så endelig slutanvendelse . PLA viser meget mindre del vridning . Af denne grund er det muligt at udskrive uden en opvarmet seng og bruge mere almindeligt tilgængelige "blå" malere tape som et print overflade. PLA gennemgår mere af en fase -change , når de opvarmes og bliver meget mere flydende . Hvis aktivt afkølet, kan meget skarpere detaljer ses på trykte hjørner uden risiko for revnedannelse eller vridning . Den øgede strøm kan også føre til en stærkere binding mellem lagene , forbedre styrken af den trykte del . Styrke: PLA i forhold til ABS er mere skrøbelige og vil være tilbøjelige til at splintre og bryde hvor ABS kan have en tendens til at bøje , men der kræves tilsvarende kraft til enten at mislykkes. Det er mere sandsynligt , at du vil finde dine udskriftsindstillinger at være en større bidragyder til styrken af ​​udskrevne objekter end plastik , du bruger (mindst mellem PLA og ABS) . Utilstrækkelig infill tæthed , for få skaller, kan delaminering ( lag trække fra hinanden ) , og andre relaterede problemer gør dit objekt svag , selvom selve materialet er relativt stærk. Hvis dine objekter føler for spinkelt eller bryde alt for let prøve upping infill , tilføjer skaller ( afgrænsninger ) , og tilpasse din temperatur og hastighed muliggør bedre vedhæftning mellem lagene . Udskrivning: PLA eller for at bruge det fulde navn, Poly Mælkesyre er nok det bedste materiale til at komme i gang med , når du først begynder 3D-print . Med hjælp fra 3D- printerens om bord fans den vil køle og sat meget hurtigt. Det betyder, at du kan undgå vridning og opnå en række former , der ville være sværere med andre materialer. Efterbehandling : Efter 3D-print kan du afslutte din model ved slibning og sprøjtning med bilindustrien spray fyldstof. Du kan også male direkte på PLA med akryl maling.

Mere
3D Nielsen
Cvr: 35125108 | H.P Christensens Vej 3 | 3000 Helsingør
Tlf: 30 27 30 51 | Mail: Info (snabel-a) 3dNielsen.dk