Tidligere kaldet Mailbox Red
Featuring increased impact strength of up to 9 times that of regular PLA and 20% more tough than ABS, 3DE MAX PLA is a sure winner when it comes to toughness.
So if you are looking for a material that can withstand your mechanically demanding tasks, 3DE MAX is up for the challenge.
High Quality : The high mechanical strength of 3DE Premium is achieved with no compromise in printing quality. As 3DE MAX is also produced with Jam-Free technology
With 3DE MAX you can be certain you will get high quality prints with excellent strength while still enjoying the ease of printing PLA.
An alternative to ABS : Still printing ABS while trying to endure the odour and potential health risk? With 3DE MAX you can get rid of that potentially hazardous ABS
and still achieve the same structural strength with even more benefits such better printer compatibility, easier printing, less warping, no hazardous odours, and in many cases
even better mechanical properties - though not as flexible as the ABS. If you need the flexibilities from ABS we recommend you take a closer look on the 3DE PETG Materials.
Glass Transition Temp
~ 60 °C
1.17 – 1.24 g/cm3
± 0.05 mm
(Typical~ ± 0.02 mm )
The spool on 3de MAX is transparent with an indicator of used filament on the side.
Recommended 3D printing temperature
190 – 220 °C (Diameter of 1.75mm)
Recommended 3D print speed
40 – 150 mm/s
Recommended heated bed temperature
Not Required - but recommended
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with a SpiderSheet which is a build plate surface designed specifically for desktop FDM/FFF printers.