Tillbage till toppen

Nema17 12N-cm stepper motor



119,95 kr95,96 kr kr ex. moms

Yderligere information

Nema17 12N-cm stepper motor with 16.5mm D shaft for grub screw and 0.4m wiring.

These stepper motors are smaller NEMA17 Stepper Motors for use on your extruder or printer axes. Weighing only 130g but still producing 12N-cm of torque these motors make an excellent choice for use on a Titan extruder if the Titan is to be used with 1.75mm filament. Lighter and shorter than the standard motors, but producing plenty of torque after the 3:1 ratio of the Titan.

The body of the 12N-cm motor is 24mm long (22mm not counting the protrusion around the motor shaft), and the shaft is 16.5mm long.

Note that the shaft length is on the shorter side. It should be OK with Titan mounts that have 2mm or less of thickness. For thicker mounting solutions, you will want to consider a motor with a longer shaft.

Notis there is no connectors on the cabels

Model No.17HS0401-18B
Holding Torque12 N-cm
Resistance3.3 ohms
Stepping Angle1.8°
Rated Current0.8A




32mH ± 20%(1KHz)

13 Andre produkter i denne kategori:

Kunder, der købte denne vare, købte også

3D Nielsen
Cvr: 35125108 | H.P Christensens Vej 3 | 3000 Helsingør
Tlf: 30 27 30 51 | Mail: Info (snabel-a) 3dNielsen.dk