PayPal - EAN
Reference: 2bd-10855
Prusa Specific Heater Cartridge 24V 40W (MK3)
Reference: 2bc-10796
This All Metal / Titatium hotend fits Creality CR10 - S3 - S4 - S5 Creality Ender 2 Creality Ender 3 Creality CR20 Creality CR2020 Creality CR3040S (can be modded to direct) Creality CR4040S (can be modded to direct) Creality CR8 Afinibot A31 Afinibot A9 Whole Afinibot Series Tronxy or other Creality copies
Reference: 4ab-10426
• Poles: 4 P • Material: PA66 W.C.H=Wire Cable Housing. Product information:• Current Rating: 3 A AC, DC• Voltage Rating: 250 V AC, DC• Temperature Range: -25 deg C ~+85 deg C• Contact Resistance: 20 m Omega Max.• Insulation Resistance: 1000 M Omega Min.• Withstanding Voltage: 1000 V AC/minute
Reference: 5ae-10739
300mm x 30M Kapton Tape High Temperature Heat Resistant Polyimide F019-200
TMC2130 Silent Stepper Driver
Driver capability up to 1.2 A (RMS) continuous coil current
Step/dir interface up to 256 microsteps
SPI interface or CFG pins for configuration
Motor voltage: 5.5-45 V
Logic voltage: 3.3-5 V
Stealthchop- for quiet operation and smooth motion
spreadCycle-highly dynamic motor control chopper
coolStep-current contrio for energy saving
stallGuard-sensorless motor load detection
dcStep-load dependent speed control
YOUTUBE: https://www.youtube.com/watch?v=yiHLwdAIApQ
Reference: 3bc-10818
Step angle: 1.8 degreeRated voltage: 3.36VTwo phase bipolar, rated current 1.2AResistance per phase 2.8 OhmsInductance per phase 3.5mH+-20%Holding torque 240mN.m Ledning medfølger 70cm. lang
TMC2130 Silent Stepper Driver
